Opisy

• LED tune controller DC5V-24V SPI RGB Smart dream colour for 5050 ws2811 ws2812b led strip modules 1 The "power-and-go" clever controller can routinely change from the music marquee mode to the general marquee mode through identifying the audio enter signal. And it is going to alternative mechanically in thousands of types by means of means of technique of the internal algorithm. 2 parameters 1. Operating temperature: -20 - 60 2. Operating voltage: 5V – 24V 3. Signal output: SPI signal, 250pixels; applicable lamp bead: WS2811/WS2812. 4. Consumed power: < 0 5. Product size: 81mm×51mm×23mm 6. Product internet weight: 58g 3 disorders 1. Through assorted light mixture types of light bar, string light and point-source light, mixed with the pattern layout, the personalized touch would be realized. 2. The controller is the overall type, and desires to be compatible with different styles of music. The controller's distinction for the sort is dependent upon the depth of the audio input signal. If the bright tender replace is needed, flip the volume as much as the maximum, and the loudspeaker is adjusted throughout the incorporated quantity management function of the audio. 3. It is advised to apply the low-light point backing gentle in whole darkness and keep a suitable distance, as a manner to forestall the eyes discomfort. 4. The audio cable length is diverse in the installation, and the product's audio cable is very used for testing function, and it's told to establish the better-performance audio cable with conserving functions, with the aim to get the higher sound high quality and prevent the audio cable noise caused by the antenna effect. 5. The controller receives the input signal from the two left and right channels, and only 1 channel enter will vastly lower the impact of sunshine change. And AM to AM three audio cable makes use of the three-stage touch with the two-channel mode, and please do not use the four-stage contact with the microphone mode. 6. Output two ways utilizing the one-to-two audio contact or one-to-two couple line immediately from the player to the controller and audio. Do not use the one-to-two lotus touch that individually outputs the left and appropriate channel, resulting in just one channel input of the controller and audio. 7. In order to raised stick to the original kind of music, the audio acquisition of controller adopts the three audio cable input, rather than collecting the sound utilizing microphones. 8. The controller's output capability is limited, so the signal amplifier is needed to increase the signal line or multiplexed output. The sign amplifier can isolate the ability among mild bars of alternative voltage, sharing the signal amongst gentle bars of other voltage. 4 1. Avoid using it in damp environment, and maintain faraway from contacting with water and diverse liquids. 2. Use the product faraway from magnetic field. 3. Do now not let the youngsters contact the wiring, in an effort to maintain away from the damage attributable to the product interface and wiring errors. 4. Non-professional consumer is forbidden to open the shell. 5. The product appearance uses the steel material, so the rust because of the scratch, surface layer peeling and pure metal oxidization are beyond the scope of the warranty.

• 
• 
• 
• 
• 

Recenzja