Opisy

• Overview Dual power automatic transfer switches are newly developed miniature household strength move switches This swap is mainly used to check whether or not the conventional or standby strength supply is traditional When the conventional strength supply is abnormal, the backup strength supply will work directly to ensure the continuity, reliability, and safety of the ability delivery Check the management power delivery voltage: 50/60Hz AC220-240V The connecting cord of the control circuit shouldn't be too lengthy The cross-sectional subject of the copper cord ought to be greater than 2 Wiring diagram of controller 1(Must be connected) Take 0 line and hearth line from the typical control incoming line to connect AR (live wire) / AN (neutral line) 2 (Must be connected) Take 0 line and fireplace line from the backup control incoming line to attach BR (live wire) / BN (neutral line) three power indication sign is passive output, and the generator signal is taken (common) and (normally closed) 4 the weight finish at the lower finish of the (standby power supply side), Stepped wiring five is an isolation board at the load When wiring, first eliminate the isolation board, join the load and then set up the isolation board (it is recommended to attach the weight first, then connect the backup strength supply)

• 
• 
• 
• 
• 

Recenzja