Lightdow 12 " Inch 30cm 18% Foldable Gray Card Reflector White Balance Double Face Focusing Board with Carry Bag
Description:
Material: PU leather, scrub resistance, reminiscence steel skeleton, million fold with out deformation
The product one facet is gray, the other facet is white, one for correct exposure, while the opposite for setting the white balance, if the images you shoot are continuously too dark or too bright, blue or yellow, then use this
Using the most recent double-sided design, the middle of the 18 degrees gray card with a secondary concentration scale, the opposite facet is pure white,which is the right way to tune the white stability shade of photography, could be folded into the small bag when now not in use, smooth to carry and use
Advantages compared to usual cardboard gray card : could be folded, smooth to carry, PU leather texture isn't always clean to damage, soiled can scrub, lengthy service lifestyles
Specifications:
Gray side: Reflectance 17%; Density 0
for Max deviation of reflectance: 2%
for Max error in publicity measurements: 1/8 of F-stop
Size:30 x 30cm
Net weight:about 70g
How to use it :
1 Turn the camera&;s power on and set it in any shooting mode Toggle the camera&;s leading management wheel to set the white stability to the LCD display PRE position, maintain down the WB key for greater than 3 seconds, and the reveal Pre starts to blink You could make a guide white steadiness atmosphere At this level the lens alignment grey card press the shutter, if the size is successful, the LCD display will reveal Gd
2 The distance between the lens and the gray card must be stored above 15 cm, and the grey card ought to be packed with the whole screen as much as possible, and any projection ought to be averted at the grey card three The grey balance process is self sufficient of the focal size of the lens, and AF auto focus would be switched over to MF handbook concentration and the lens focal size is adjusted to infinity The objective is to make the gray card extra blurred and delicate Exposure reimbursement function may possibly intrude with the measured data, it is recommended to shut the publicity fill operate Package contents:
1 x 12 "/30cm Grey/White Balance Card
1 x wearing bag
How to Fix WB In-Camera With a Grey Card
The exact way of setting the white steadiness in digicam with a gray card could differ from below, reckoning on the brands
Check your digicam handbook or seek on Google about custom white stability and specify your camera’s model
Place the grey card within the scene;
Set the digital camera to guide focus;
Frame the shot in order that the grey card fills the whole body Don’t fear in regards to the sharpness of the image It will paintings superb although it’s out of focus;
Check exposure and modify if you need to;
Press the WB button whereas turning the main dial till you select PRE
Release the button Press and hold it back until the letters PRE delivery flashing
Take the photo of the grey card before PRE stops flashing
That´s all! The digital camera has simply created a WB preset according to the picture you only took
In other camera models, you may deserve to take a photo of the grey card after which choose it in the Custom White Balance because the reference picture