Opisy

• Solar Controller Light Generator Charge Circuit Switch Lithium Battery Charge Board DIY Street Lamp Power Supply Accessories Features: 1 Using effective materials, the standard is guaranteed 2 Photovoltaic solar charge and discharge computerized control switch, compatible for different battery voltages three Easy to use and portable 4 Charge throughout the day, switch on the sunshine mechanically when it's dark, and turn off the light automatically at dawn 5 The low-power controller is suitable for photo voltaic garden lights, garden lights, string lights, small street lights, and so forth Features: Charge throughout the day, robotically activate the lighting at dusk, and switch off the lighting fixtures mechanically at dawn The output voltage is the output voltage when the battery isn't any voltage The circuit controls the output via detecting the voltage replace of the solar panel energy era Wiring method: 1 B+B-connected lithium battery 2 S+ S- connect to solar panel three L+L- connected to output Wiring sequence: 1: Access to lithium battery The battery must have a corresponding protecting plate 2: Connect to the LED, the lithium battery is charged, and the LED lights up at this time 3: Connect to the solar panel At this time, the photo voltaic panel has gentle and the LED is off and the LED is on without gentle If it ought to be closed at evening or the swap interface SW has been reserved for transportation and storage, the switch would be put in Precautions: 1: The stable operating output current of the control board can't exceed 600ma, in any other case it might trigger output protection 2: Charging anti-backflow with out overcharge and overdischarge protection Lithium batteries needs to be used with corresponding defense forums (all cellphone batteries have 3 protection, greater than 18650 don't Can now not use three defense boards in series) 3: Pay attention to water-resistant and insulation 4: LED lamps can't use enhance force 5: The battery voltage of the controller is the output voltage, with unlimited recent and restricted voltage 2V3V LED lamp beads can't be used immediately They should be pushed through step-down fixed latest or utilized in series with current-limiting resistors The output recent is the utmost operating current and non-constant current Special Note: 1: The output strength is the particular power, please verify the particular strength consumption of the weight before use 2: Connecting directly to 3Vled may damage the controller or LED 3: The battery must have a protection board, the battery voltage matches the open circuit voltage of the photo voltaic panel Package list: Solar control switch circuit board*1

• 
• 
• 
• 
• 

Recenzja