Opisy

• UV Light Glue Super Glue Shadeless Glue Fix Adhesives Sealer Glass PVC Plastic Model Data Lines Crack Caulk Bond Repair ToolsdescribeProduct Name: Shadowless AdhesiveNet content: 10/50ML bottlesScope of application: Suitable for bonding glass to supplies resembling glass, metal, wood, stone, etc.Colloidal color: colorless to gentle yellow transparent liquidShelf life: 12 monthsUV radiation: 1000mJ/cm2Viscosity: 500-1500mpa. sCuring time: 10S~20SStorage: Please store in a cool, dry, and darkish placeApplicable scope:Suitable for bonding and assembling products reminiscent of crystals, glass, transparent acrylic, glass to metal, glass to glass, glass furniture, crystal crafts, etc5 main features:Traceless bonding, sturdy and firm, excessive transparency, brief bonding inside 10 seconds, no whitening phenomenon.This equipment includes:1 x shadowless adhesive (excluding LED lights)1 LED (excluding battery, random color)Use the following steps:1. According to the surface medication of the material, the outside is dry and clean, and there isn't any susceptible boundary layer;The interface adhesive must be consistently applied to the bonding material, being careful to not disperse;3. Position the adhesive to allow brief ultraviolet rays to shine into the UV curing lamp till the hand is clamped and fixed;4. Use a knife to remove extra glue, scrape off the spilled glue with a spatula, or gently wipe off extra glue with a gentle material or tissue; It is also dipped in acetone and wiped with alcohol;5. Sufficient curing time and excessive radiation until total curing, taking care to not increase the temperature too high;Dip a mushy fabric or tissue in acetone, alcohol, and detergent, and gently wipe the adhesive material.Instructions for use:1. The floor of the adhesive ought to be clean, dry, and free of grease. It would be wiped with acetone and a hair dryer.2. Place the UV lamp in the curing position, and the curing pace is dependent upon factors reminiscent of the sunshine calories absorbed by means of the adhesive and the sunshine source, clear material, etc.3. During the operation, do not follow pressure to make it sticky, and don't repeat the separationStickers.4. Do not pour the remaining glue again into the unique packaging during use to circumvent contamination.

• 
• 
• 
• 
• 

Recenzja