Opisy

• Specifications Material：Martensitic stainless steel+304 stainless steel Machine Weight: about 1 Thinning width: inside 8/3 Thinner thickness: zero Note： 1 machine sharpness immediately associated with the blades It is recommended to switch the blades continually 2 to thickness beneath 1 requires very sharp new blade for operation, and isn't suitable to skinny beneath 1 for gentle and elastic leather materials Feature 【Customized design around & high-strength rubber handle】which doesn't rub or crack when pressed, and comfortable feeling 【Customized double-bearing 304 chrome steel roller 】Smoother rolling and extra labor-saving females can smoothly operate 【Customized knurled screw, extra exact thickness adjustment】Rotate the screw left and correct can adjust the cutting thickness accuracy can reach within 0 【Add the blade positioning machine to put the blade accurately】ow to switch the blade：Remove the screw to replace the blade with marketplace normal size 18 blade of width 18mm/0 inches Note : 1、The above values are reference values, the particular chopping width is area to the standard of leather, the talent and operation level of operators, they're vital factors affecting the chopping width 2、The machine sharpness is instantly associated with the blade is suggested to replace the blade regularly or choose the next quality blade 3、Wipe the curler clear before use to stop staining the leather It is suggested to use scrap leather-based for test first About size Machine Weight: about 1 Thinning width: within 8/3 Thinner thickness: zero Customized design around & high-strength rubber manage which does not rub or crack when pressed, and comfy feeling Feature ------Customized double-bearing 304 stainless-steel roller Smoother rolling and extra labor- saving ladies can easily operate ------Customized knurled screw, extra exact thickness adjustment Rotate the screw left and appropriate can regulate the cutting thickness accuracy can reach within 0 WUTA VS OTHER BRAND WUTA ①Round & high-strength rubber handle ②Blade positioning device,place the blade accurately ③Customized knurled screws ④Larger backside plate Press extra secure and not easy to tip over when pulling Other brand ①Steel manage hurts your hand and uncomfortable, wood manage is simple to crack when pressed ②Without positioning device, so it is not easy to install the blade function precisely ③Small bottom plate, the middle of gravity is unstable, clean to tip over when pressed Operation components ①Press the handle down, the roller leaves the blade ②Put the leather with the back going through up, then pull out the leather frivolously and forcefully Sharp blade with rust prevention remedy Maximum reducing width 8/3 The blade length is about 9, and we recommend to cut leather-based of max width 8 The wider the leather is, the more challenging it is to operate How to regulate the leather thickness Control the screw to adjust the cutting thickness Recommended to be thinned to zero above Note：Thinning to thickness below 1 calls for very sharp new blade for operation, and isn't appropriate to thin under 1 for tender and elastic leather-based materials The blade is exposed slightly more, for reducing more durable and thicker leather The blade is much less exposed, appropriate for chopping smooth and thin leather Note：Thinning to thickness beneath 1 calls for very sharp new blade for operation, and isn't appropriate to skinny beneath 1 for comfortable and elastic leather materials Recommend leather Vegetable tanned leather, bridle leather-based ,belt leather,hard leather, thick leather, and so on

• 
• 
• 
• 
• 

Recenzja