Description

• 1/5/10/20pcs Thermal Grease Paste Conductive Heatsink Plaster Viscous Adhesive Glue For Chip VGA RAM LED IC Cooler SealantDescription:1.It has high power and instant bonding effect, and is acceptable for directly attaching assorted components, LEDs and heat sinks. 2.Good thermal conductivity, strong adhesion, vacuum packaging isn't clean to oxidize and dry, nice viscosity, brief drying time. 3.It has good conductivity, vast operating temperature fluctuate (-60~200°C), and momentary resistance to 300°C. 4.It has brief floor curing time, lengthy garage period, non-toxic, solvent-free, and might be safely applied to elastic bonding, warmth dissipation, insulation and packaging of electronics, instruments, LEDs, warmth sinks, etc. 5.Instructions: 1) Extrusion of the product directly throughout use, rubbing the skin of the adherend, and instantly protecting it after use, in case of trial back 2) The surface constant pace is related to the relative humidity and temperature within the air; the higher the temperature, the faster the curing speed, and vice versa. 3) Recommended thickness: 0.1-0.5mm, the thinner the better. 4) Please use solvent to wash the skin of the bonded object before use (such as alcohol), avoid cleaning with detergent, and observe it after the skin is clean. 6.The kit is sealing and the product is roofed with a vacuum bag to insulate the air and expand the garage time.Specifications:Thermal properties, strong glue adhesion. Specifications: 5g (single) Melting amount: 0 (200°C/24 Hours) Evaporation: 0.001% (200°C/24 Hours) Thermal Conductivity: >0.671W/m-K Impedance: Ging Time: 3min (25°C) Track Strength: 25Kg Strength of Connected Buildings: 1.5map Margin Coefficient: >5.1 Scatter Coefficient: Package Included:1 x Heatsink Plaster

• 
• 
• 

Review