Description

• Hybrid Solar Inverter 10 6 four 3KW Off Grid Pure Sine Wave Inverter 48V 24V 12V 230VAC with MPPT 160A 120A 80A Charger Ukrainian clients should improve to an EU warehouse for cargo to Ukraine Please click on the following link to pay for the order Note:1: Orders from EU shoppers are prioritized for cargo from EU warehouses Expected shipping time is 3 to 7 days Ukraine, Ukraine is predicted to take 5-20 days2: Free return and refund service, go back to native warehouse within the European Union3: Buyer defense for over ninety days4: Provide a two-year warranty period5: If you've any questions, please touch us and we are able to provide technical help Model SCI-ECO-3600 SCI-ECO-4200 SCI-ECO-6200 RATED POWER 3600W 4200W 6200W Maximum PV Input Power 6200W 6500W GRID-TIED OPERATION PV INPUT (DC) Nominal DC Voltage/Maximum DC Voltage 360VDC/500VDC Start-up Voltage/Initial Feeding Voltage 90VDC/120VDC MPPT DC Voltage Range 60-500VDC Number of MPPT Trackers/Maximum Input Current 1/18A 1/22A GRID OUTPUT (AC) Nominal AC Output Voltage 220/230/240VAC AC Output Voltage Range 195-253VAC Nominal AC Output Current 15 18 26 Power Factor >0 Feed-in Grid Frequency Range 49-51±1Hz / 59-61±1Hz EFFICIENCY Maximum Conversion Efficiency (DC/AC) 97% TWO LOADS OUTPUT POWER Full Load 3600W 4200W 6200W Maximum Main Load 3600W 4200W 6200W Maximum Second Load (battery mode) 1200W 1400W 2067W Main Load Cut Off Voltage 22VDC 44VDC Main Load Return Voltage 26VDC 52VDC OFF-GRID OPERATION AC Start-up Voltage/Auto Restart Voltage 120-140VAC/180VAC Acceptable AC Input Voltage Range 90-280VAC or 170-280VAC Maximum AC Input Current 30A 30A 40A Nominal Operating Frequency 50/60Hz Surge Power 7200W 7200W 12400W No Load Power Consumption 30W 35W 50W BATTERY MODE OUTPUT (AC) Nominal Output Voltage 220/230/240VAC Output Waveform Pure sine wave Efficiency (DC to AC) 93% BATTERY & CHARGER Nominal DC Voltage 24VDC 48VDC Maximum Charging Current(Solar to AC) 120A Maximum AC Charging Current 100A GENERAL Dimension, D x W x H (mm) 110*334*423mm Net Weight (kgs) nine nine 10 Communication interface WIFI Humidity 5% to 95% Relative Humidity (Non-condensing) Operating Temperature –10°C - 50°C Storage Temperature –15°C - 60°C Dual output operate description: The main and secondary outputs are used in normal condition But in the following two conditions, the key output is disconnected and only the secondary output is retained: - when there is not any solar energy enter and mains strength input; - when the battery voltage is less than 44V (the minimal could be set to 41V, and the maximum would be set to 46V); Features: ◆Pure sine wave solar inverter ◆Inverter working with out battery ◆One-key recovery to manufacturing facility settings ◆With operate of Lithium battery computerized activation through PV ◆Bulit-in 120A MPPT photo voltaic controller ◆Max 6200W(for 4) & 6500W(for 6) photo voltaic charge ◆High PV input voltage range(60-450VDC) ◆Built in anti-dusk kit for harsh surroundings ◆Smart battery charge design to optimize battery existence Dual output ◆WIFI accessible for IOS and Android Model SCI-ECO-2000 SCI-ECO-3200 RATED POWER 2000VA/1600W 3200VA/3000W AC INPUT AC Input Voltage 230VAC Selectable Voltage Range 170-280 VAC (For Personal Computers) 90-280 VAC (For Home Appliances) Frequency Range 50 Hz/60 Hz (Auto sensing) AC OUTPUT AC Voltage Regulation (Batt Mode) 230VAC ± 5% Surge Power 4000VA 6400VA Efficiency (Peak) PV to Inverter 98% Efficiency (Peak) Battery to Inverter 94% Transfer Time 10 ms (For Personal Computers);20 ms (For Home Appliances) Waveform Pure sine wave BATTERY & AC CHARGER Battery Voltage 12VDC 24VDC Floating Charge Voltage thirteen 27VDC Overcharge Protection 16VDC 33VDC Maximum AC Charge Current 60A SOLAR CHARGER Maximum PV Array Power 2000W 3000W MPPT Range @ Operating Voltage 30-400VDC Maximum PV Array Open Circuit Voltage 400VDC Maximum Charging Current 80A PHYSICAL Dimension, D x W x H (mm) 360*270*100mm 390*270*100mm Net Weight (kg) four five INTERFACE Communication interface WIFI OPERATING ENVIRONMENT Humidity 5% to 95% Relative Humidity(Non-condensing) Operating Temperature –10°C - 50°C Storage Temperature –15°C - 60°C Note: How to properly event the battery ability of the components is decided according to the categorical utilization requirements of the weight and alertness scenarios, in any other case it will easily end in insufficient battery ability or immoderate waste of energy technology For details, please seek advice from the manual advice or consult online customer support After regular startup of the inverter, No 8 and No 9 have AC AC output 220/230/240V, No 8 is the Main output mainly used for high-power load, No 9 is mainly used for emergency strength use with low-power load Inverter use notice 1 The starting energy of inductive load electrical appliances shall be a minimum of thrice of the rated energy of the electric appliances If the beginning energy exceeds the inverter power, the inverter may be damaged Please select an appropriate model before purchasing 2 Please connect the circuit properly in line with the instructions, and set up switches for every circuit 3 Starting sequence: first switch on the battery switch, start the inverter, and turn on the PV, mains and load switches four Shutdown sequence: flip off the switches of load, PV and mains, flip off the inverter, and finally flip off the battery In order to realize stable operation of the solar formula and save electrical energy bill, it is suggested to attach the battery; when the mode is decided to SBU, the formula will use the PV and battery first and the utility last FAQ: Q:Whether at first battery?A:NoQ:Whether it is going to instantly supply strength to the load?A:YESQ:Whether it can be linked to the grid?A:PV provides precedence to strength supply to the load, and additional to payment the battery, and extra could be integrated into the grid (need to be in keeping with local authorities policies)(1600W and 3000W units can not ship final power)Q: How many solar panels should be connected?A: In order to begin the inverter normally, the voltage of the solar panel is usually recommended to be 300V-400V, The most would not exceed 500V For PRO-3/PLUS-6, and the power of the solar panel isn't greater than 6/6 For example, 10 pcs of 250W 30V solar panels are related in series: Can inverters be related in sequence or parallel?A: NO: Is this a on grid-tied inverter? Can it's output to utility?A: YES It is a hybrid inverter that can be both off-grid and on-grid connectedQ: Does the inverter have to be connected to the battery?A: Can be related with or without battery, yet with out the battery, the voltage of the solar panel should exceed 360Vdc: What kinds of batteries would be used?A: Lead-acid batteries, gel batteries,Lithium Iron Phosphate(LiFePo4) and lithium batteries can be used 24V battery for 3, 48V battery for 6 The battery can't be lower than 100AH: Can it be utilized in air conditioners, water pumps, and wind turbines?A: It can be used in air conditioners, but no longer in water pumps and wind turbines: Is it a excessive frequency inverter or a low frequency inverter?A: High frequencyQ: Can the utility be used to strength the inverter when there's no sun?A: YES: How to make your mind up the ability of the inverter in step with the household appliances?A: If household home equipment involve inductive load appliances, comparable to refrigerators, washing machines, air conditioners, etc, the power of the inverter is a minimum of three times the total strength of the inductive load appliances, otherwise the appliances might not be ready to start: Is it possible to apply PV, battery, grid supply at the similar time?A: YES The default PV precedence mode, when the PV input is insufficient, the battery and software could be used

• 
• 
• 
• 
• 

Review