Description

• I Technical parameters Working voltage:12V(9-15V DC) 24V(18-30V DC) Full-load motion current:12V-2(automatically disconnect the power supply after the motion in place, working current<15mA) Power supply, operating latest <15mA) Control line operating current:<15mA Working stroke:53±1mm Maximum pulling force: 90N Ambient Temperature:-30℃C~60℃ Operation time:<2 seconds Overload protection:When the flame quencher is overloaded or jammed, it'll stop working routinely to avoid injury to the flame quencher After disconnecting the power supply of the flame quencher for a era of time and re-powering, the flame quencher could be reset from the defective state and may resume common paintings Wiring instructions of the flame failure device There are three wires in total, as follows: red: connect to the fantastic pole of the power delivery yellow: hook up with the detrimental pole of the power delivery inexperienced (or blue) for the management line Normally open type: when the management line is energized, the extinguisher moves, and forestalls robotically after the action is in position Normally closed type: the flame arrester operates when the control line is de-energized, the flame arrester releases when the management line is energized and prevents robotically when the motion is in position

• 
• 
• 
• 
• 

Review