Description

• The Longlife Air drier works on the foundation of the silica gel supplies cutting off the moisture out of the air because it passes during the plastic container moist atmospheric situations the gel will soak up moisture and could update colour to red if it has soak up much moisture. When this happens the silica gel should either be heated up and dried or replaced. The heating up can be executed in the oven, microwave oven or direct sunlight. First get rid of the drier from the physique of the generator by means of pulling the 2 plastic connections out from the aspect panel connections. To get rid of the silica gel for drying unscrew the top cap, perforated plate and foam rubber insert. Place the silica gel in to a pitcher or ceramic container and gently warm temperature up till the colour changes again indicating cutting off of moisture. DO NOT OVERHEAT OR COOK!! Warranty: 2 years Specification:Model: Lonlf-AD001Output R: <20% RH 2/min fuel movement for five hoursDrying theory: Silica gel beadsLength: three hundred MMDiameter: 50MMAir inlet/out diameter: 8(Use 8mm Inner Dia. tube)Applied 1-30grams ozone generator Feature:The air dryer is full of Silica gel beads which are highly absorbent when cutting off moisture from the ambient air. 1. Increase the performance of your ozone generator. 2. Stop particles from moving into your ozone generator via its filters 3. Change shade from blue to crimson when total with moisture. 4. Can be easily recharged by placing the complete unit into an oven or microwave Details

• 
• 
• 
• 
• 

Review