Description

• Features ● Comply with the DMX512 typical protocols. ● Digital numeric display, set DMX decode beginning address by way of buttons. ● RDM function can perceive intercommunication between DMX grasp and decoder. For example, DMX decoder manage can be set through DMX grasp console. ● 1/2/4 DMX channel output selectable. ● 16bit (65536 levels) /8bit (256 levels) gray level selectable. ● PWM frequency 250/500/1000/2000/4000/8000/16000Hz selectable. ● Logarithmic or linear dimming curve selectable. ● Stand-alone RGB/RGBW mode and 4 channel dimmer mode selectable, which be controlled through buttons with included programs, rather than DMX signal. ● Green terminal, XLR3 and RJ45 port DMX signal input. ● Over-heat / Short circuit protection, get well automatically. Technical Parameters: Model No.: D4-XE four Channel Constant Voltage DMX512 RDM Decoder RDM/Stand-alone function/Seven PWM frequency/Linear or logarithmic dimming/Numeric demonstrate Input and Output Input voltage : 12-36VDC Input recent : 32 Output voltage : four x (12-36)VDC Output curren t: 4CH,8A/CH Output energy : 4 x (96-288)W Output range : Constant voltage Operation System parameter environment ● Long press M and ◀ key in the same time for 2s, train for setup method parameter: decode mode, grey level, output PWM frequence, output brightness curve, default output level, computerized clean screen. quick press M key to change six item. ● Decode mode: brief press ◀ or ▶ key to change 1/2/4 channel decode mode("d-1","d-2" or "d-4"). When set as 1 channel decode, the decoder occupy only 1 DMX address, and four channel output an identical brightness of this DMX address. ● Grey level: brief press ◀ or ▶ key to switch 8bit("b08") or 16 bit("b16"). desire sixteen bit if the DMX hold close assist 16 bit. ● Output PWM frequency: quick press ◀ or ▶ key to modify 250Hz("F02"), 500Hz("F05"), 1000Hz("F10"), 2000Hz("F20"), 4000Hz("F40"), 8000Hz("F80") or 16000Hz("F16"). Higher PWM frequency, will trigger lower output current, greater energy noise, yet extra well suited for camera(No ickers for video). ● Output brightness curve: short press ◀ or ▶ key to change linear curve("C-L") or logarithmic curve("C-E"). ● Default output level: press ◀ or ▶ key to alter default 0-100% point ("d00" to "dFF" ) when no DMX input signal. ● Automatic clean screen: quick press ◀ or ▶ key to switch allow ("bon") or disable("boF") automatic clean screen. ● Long press M key for 2s or timeout 10s, give up method parameter setting. DMX mode ● Short press M key, when show 001~512, input DMX mode. ● Press ◀ or ▶ key to change DMX decode start address(001~512), lengthy press for instant adjustment. ● If there's a DMX sign input, will enter DMX mode automatically. ● DMX Dimming: Each D4-XE DMX decoder occupy four DMX handle when connecting the DMX console. For example, the defaulted start manage is 1, their corresponding relationship in the form: Stand-alone RGB/RGBW mode ● Enter stand-alone RGB/RGBW mode solely when DMX signal is disconnected or lost. ● Short press M key, when demonstrate P01~P30, input stand-alone RGB/RGBW mode. ● Press ◀ or ▶ key to change dynamic mode number(P01~P30). ● Each mode can modify pace and brightness. Long press M key for 2s, train for setup mode speed, brightness, W channel brightness. Short press M key to switch three item. Press ◀ or ▶ key to setup charge of each item. Mode speed: 1-10 level speed(S-1, S-9, S-F). Mode brightness: 1-10 point brightness(b-1, b-9, b-F). W channel brightness: 0-255 level brightness(400-4FF). Long press M key for 2s, or timeout 10s, give up ambiance Stand-alone dimmer mode ● Enter stand-alone dimmer mode solely when DMX signal is disconnected or lost. ● Short press M key, when show L-1~L-8, enter stand-alone dimmer mode. ● Press ◀ or ▶ key to alter dimmer mode number(L-1~L-8). ● Each dimmer mode can modify every single channel brightness independently. Long press M key for 2s, train for setup 4 channel brightness. Short press M key to change 4 channel(100~1FF, 200~2FF, 300~3FF, 400~4FF). Press ◀ or ▶ key to setup brightness cost of every channel. Long press M key for 2s, or timeout 10s, stop setting. Restore factory default parameter ● Long press ◀ and ▶ key for 2s, restore factory default parameter, display"RES". ● Factory default parameter: DMX decode mode, DMX decode beginning handle is 1, four channel decode, eight bit grey level, 2000Hz PWM frequence output, logarithmic brightness curve, output one hundred pc point when no DMX input, RGB mode quantity is 1, dimmer mode number is 1, disable automated clean screen. Package content:1 piece * D4-XE 4 Channel Constant Voltage DMX512 RDM Decoder

• 
• 
• 
• 
• 

Review