Description

• 4 Channels 0/1-10V DMX512 Decoder Model No. : DL RDM/Stand-alone function/Linear or logarithmic dimming/Numeric display/Din Rail Features: ● Comply with the DMX512 usual protocols. ● Digital numueric dispaly, set DMX decode delivery deal with through buttons. ● RDM operate can understand intercommunication between DMX grasp and decoder. For example, DMX decoder tackle can be set by technique of DMX grasp console. ● 1/2/4 DMX channel output selectable. ● 0-10V or 1-10V output selectable. ● Logarithmic or linear dimming curve selectable. ● Stand-alone RGB/RGBW mode and four channel dimmer mode selectable, which be controlled through buttons with included programs, rather than DMX signal. Technical Parameters: Input and Output Input voltage: 12-24VDC Input signal : DMX512 Output signal : 0/1-10V analog Output latest : 4CH,20mA/CH Note: We recommend the number of LED drivers related to 0/1-10V dimmer (each channel) does not exceed 20 pieces, The maximum length of the wires from dimmer to LED motive force needs to be no more than 30 meters. Package content: 1pcs* DL DMX to 4CH 0/1-10V Signal Converter 1pcs* Introduction Manual Operation System parameter setting● Long press M and ◀ key for 2s, practice for setup formula parameter: decode mode, 0/1-10V output, output brightness curve, default output level, automated clean screen. quick press M key to modify ve item. ● Decode mode: quick press ◀ or ▶ key to switch one-channel decode("d-1"), two-channel decode("d-2") or four-channel decode("d-4"). When set as 1 channel decode, the decoder occupy only 1 DMX address, and 4 channel output an identical brightness of this DMX address. ● 0/1-10V output: brief press ◀ or ▶ key to switch 0-10V("0-0") or 1-10V("1-0"). ● Output brightness curve: quick press ◀ or ▶ key to alter linear curve("C-L") or logarithmic curve("C-E"). ● Default output level: press ◀ or ▶ key to change default 0-100% point ("d00" to "dFF" ) when no DMX enter signal. ● Automatic clean screen: brief press ◀ or ▶ key to switch allow ("bon") or disable("boF") automated clean screen. ● Long press M key for 2s or timeout 10s, quit substances parameter setting.

• 
• 
• 
• 
• 

Review