Opisy

• 22 Power Bank Bidirectional Fast Charging Mobile Power Module Circuit Board Power Supply Accesory Supports PPS/PD3/PD2 Feature: 1 Using fine materials, product high quality is assured 2 Small size, high power, high efficiency, whole protocols, basically supports all mainstream open protocols 3 The module is appropriate for three lithium batteries, adding polymer, 18650, 21700 and different lithium batteries; be sure that the battery has no longer aged, and the batteries can be related in parallel but not in series 4 The module is relatively small in length and has limited warmth dissipation subject It is usual to generate warmth thanks to excessive strength output 5 The product has a wide range of applications and is appropriate for different industrial DIY events parameter: Full protocol, mainstream open protocols primarily assist charging latest up to 5A, efficiency as much as 96%, output energy up to 22, efficiency as much as 95% Automatic load detection/light load detection High current USB output interface Support low current mode Support digital tube display and LED gentle power indicator Output overcurrent/short circuit defense Charging timeout/overvoltage protection Support PPS/PD3/PD2 Support QC4+/QC4/QC3/QC2 Support FCP, SCP (5V4 or 4/5A) Support FCP, SCP, HSCP Support SFCP Charging the battery supports PD3/PD2, AFCFCP, SCP, PE1 Precautions for use: 1 The battery and motherboard wires should not be too thin, but should be as thick as probable Fast charging forums are required to be capable of move 10A current, and non-fast charging forums are also required to be capable to pass 7A latest It can't be too long, the interface must be welded 2 Batteries can solely be linked in parallel (the variety of parallel connections isn't always limited) and cannot be connected in sequence Series connection will burn the motherboard 3 For usual application, the battery must be soldered (twisting the wires will cause inadequate power supply), and the motherboard will burn if the battery is attached reversely Be careful Keep the strains as thick and short as possible four When connecting the battery, make sure it's a 3 battery and not other batteries Make sure the batteries are usually not linked in series, otherwise the board could also be burned if the voltage connected to the battery terminal is increased than four Package list: Mini fast charging module*1

• 
• 
• 
• 
• 

Recenzja