Descriptions

• YIDI 5/10/20 pcs BD Stop Plugs BSP R half of 3/8 1/4 1/8 Air Hose Fitting Pneumatic Screw Thread Connection Connector R1/2 R3/8 R1/4 R1/8 Specification: Item No: BD Connection Way: Threaded Type: Male Thread Design: Straight Material: Metal Fluid Type: Clean Air, Vacuum, No Toxic Gas Normal Operating Pressure: 0~10kgf/cm² (0~1 / 0~1) Max Pressure: 15 bar(1) Negative Pressure: -750mmhg (10Torr) Ambient And Fluid Temperature: 0~60℃ (140℉) Installation Instructions: Installation Grasp the tubing and slowly push it into the appropriate till it involves give up The tubing could be locked through the spring gasket Remove Push the discharge button to open the spring gasket in order that the tubing could be launched Cautions: 1 Cleaning: Clean the piping before connection to take away particles 2 Tubing Cut: Ensure a perpendicular reduce with out scratches at the tubing's outer diameter 3 Pipe Length: Avoid excessive bending; choose a proper pipe length 4 Connection: After connecting, pull the tubing gently to examine its seal 5 Release: Push evenly at the release button flange for proper tubing withdrawal 6 Removal: Avoid rotating the tubing solely during elimination 7 Assembly: Ensure no debris enters when screwing pipes and fittings collectively Safety Instructions: 1 Pressure: Ensure zero strain in the tubing earlier than elimination 2 Spatter Zones: Avoid typical fittings in spatter-producing places 3 Monitor Conditions: Stay within specified strain and temperature levels four Environment: Avoid corrosive gases, chemicals, and extreme conditions 5 Placement: Avoid places with heavy vibrations or shocks 6 Direction: Install tubing within the correct one-way route Dimension:

• 
• 
• 
• 
• 

Révision