Descriptions

• EPever MPPT 40A 30A 20A 10A Solar Charge Controller 12V 24V Auto Solar Panels Regulator Solar Battery Charger Tracer Series Overview: The Tracer AN series Based on normal detrimental design and progressed MPPT control algorithm, with LCD displaying working status, this product is artistic, economical and life like Improving the MPPT management set of rules further, Tracer AN series can reduce the utmost power point loss fee and loss time, soon song the maximum energy point of the PV array and procure the utmost energy from solar modules below any conditions; and can increase the ratio of energy utilization in the photo voltaic formulation by way of 10%-30% compared with a PWM charging method The limitation function of the charging power and latest and reducingcharging strength operate automatic improve the steadiness which matches even connecting oversize PV modules and in excessive temperature, and expand the professional defense chip for the communique port, extra convalescing the reliability and meeting the various utility requirements Notice: This model has upgraded, adapt to MT52 distant monitoring，doesn&;t assist MT50 distant monitoring Features： Advanced MPPT technology, with efficiency no less than 99%\Ultra-fast tracking pace and guaranteed tracking efficiency Advanced MPPT control set of rules to minimize the utmost strength point loss price and loss time Wide MPP operating voltage range High quality components, perfecting components performance, with most conversion performance of 98% Accurate recognition and tracking of multiple-peaks maximum strength point International noted brands of ST and IR&;s ingredients of fantastic and occasional failure fee are used, which might make sure the product’s carrier lifestyles Charging strength and recent limitation operate Compatible with lead-acid and lithium-ion batteries Battery temperature reimbursement function Real-time energy statistics operate Overheating power reduction function Multiple load work modes The conversation port adopts authentic defense chip, which can provide 5VDC energy supply, and has over-current and short-circuit defense With RS-485 conversation bus interface and Modbus conversation protocol, it's accessible to satisfy different communique standards in different conditions Monitor and set the parameters by way of mobile phone APP or PC software Full-load operation without any drop in ability within the differ of operating environment temperature Extensive electronic defense Specifications: Item Tracer 1206AN Tracer 2206AN Tracer 1210AN Tracer 2210AN Tracer 3210AN Tracer 4210AN System nominal voltage 12V/24VDC Auto Rated fee latest 10A 20A 10A 20A 30A 40A Rated discharge recent 10A 20A 10A 20A 30A 40A Battery voltage fluctuate 8~32V Max PV open circuit voltage 46V 92V MPP voltage differ (Battery voltage +2V)~36V (Battery voltage +2V)~72V Max PV input power 130W/12V 260W/24V 260W/12V 520W/24V 130W/12V 260W/24V 260W/12V 520W/24V 390W/12V 780W/24V 520W/12V 1040W/24V Self-consumption <=12mA Discharge circuit voltage drop <=0 Temperature compensate coefficient -3mV/°C/2V (Default) Grounding Common negative RS485 interface 5VDC/100mA LCD backlight time 60S (Default) Environmental Parameters Working surroundings temperature -25°C~+50°C(100% enter and output) Storage temperature range -20°C~+70°C Relative humidity <=95%, N Enclosure IP30 Dimension 172x139 x 44mm 220x154x 52mm 172x139 x 44mm 220x154x 52mm 228x164x55mm 252x180x63mm Mounting measurement 130x130mm 170x145mm 130x130mm 170x145mm 170x164mm 210x171mm Terminal 12AWG(4mm 2 ) 6AWG(16mm 2 ) 12AWG(4mm 2 ) 6AWG(16mm 2 ) 6AWG(16mm 2 ) 6AWG(16mm 2 Recommended cable 12AWG(4mm 2 ) 10AWG(6mm 2 ) 12AWG(4mm 2 ) 10AWG(6mm 2 ) 8AWG(10mm 2 ) 6AWG(16mm 2 ) Weight 0 zero 0 zero 1 1 SET SET Set 2210AN-Set 3210AN-Set Accessories (optional): Remote Temperature Sensor (RTS300R47K3) Click Acquisition of battery temperature for undertaking temperature compensation of controlparameters, the conventional size of the cable is 3m (length could be customized) The RTS300R47K3 connects to the port (4th) at the controller NOTE: The temperature sensor short-circuited or damaged, the controller may be charging or discharging at the default temperature 25°C Click USB to RS485 cable CC-USB-RS485-150U Click USB to RS-485 converter is used to monitor every single controller at the community utilizing Solar Station PC software The size of cable is 1 TheCC-USB-RS485-150U connects to the RS-485 Port at the controller Click OTG cable OTG-12CM Used to attach a cellular communique cable and ready to obtain real-time tracking of the controller and amendment of the parameters by using cellular APP software Click Remote Meter MT50 Click MT50 can show diverse operating data and fault of the formulation The news could be displayed on a backlit LCD screen, the buttons are easy-to-operate, and the numeric reveal is readable Click WIFI Serial Adapter eBox-WIFI-01 After the controller is hooked up with the eBox-WIFI-01 throughout the ordinary Ethernet cable (parallel cable), the operating repute and connected parameters of the controller would be monitored through the cellular APP application by way of WIFI alerts Click RS485 to Bluetooth Adapter eBox-BLE-01 Click After the controller is connected with the eBox-BLE-01 through the regular Ethernet cable (parallel cable), the operating repute and related parameters of the controller can be monitored by means of the cellular APP software by way of Bluetooth indicators Click

• 
• 
• 
• 
• 

Révision