Descriptions

• Specification: Origin: Mainland China Motor Type: Stepper Motor Material: mixed materials Size: 50/1 The controller has 3 frequency signals: high, medium and low, that are selected with jumper pins The frequency parameters are approximately: High: five Medium: 590HZ-15 Low: 82HZ-2 PUL+ and PUL- are the tremendous and detrimental of the pulse; EN+ and EN- are the high-quality and unfavourable of the allow terminal; DIR+ and DIR- are the fantastic and detrimental of the direction Connect those 6 traces to the 6 ports of the driver such as pulse, path and enable respectively Note that if the start or quit function is to be used, the ENA enable terminal at the controller must be related to the common cathode or usual anode of the driving force 2 units of energy input, 2 units only should be related to at least one power supply One group is powered via DC 15-160VDC The other set is 5-12VDC If it is powered by 5-12VDC, join the tremendous energy supply to the "5-12V input" and the damaging strength supply to the "common cathode terminal" 4 The forward and opposite rotation and begin and prevent of the motor can be controlled via buttons 5 The pace of the motor would be managed by adjusting the potentiometer to alter the frequency 6 It turns out that the switches for forward and reverse rotation and begin and forestall of the motor are normal self-locking switches Note: Due to the several video display and lightweight effect, the actual color of the article might be slightly diverse from the colour confirmed on the photos Thank you! Please enable 1-2cm measuring deviation thanks to manual dimension 1 x Stepper Motor Driver Controller

• 

• /images/widget2.png

• 
• 
• 

Révision